P Courses

TRI-STATE SAFETY SOLUTIONS^®

TRAINING CONSULTING EQUIPMENT
866.351.4754 732.415.0782

P Courses

Personal Protective Equipment (PPE) Training

This course will provide training to employees required to use PPE. Each such employee shall be trained to know when PPE is necessary what PPE is necessary, how to properly don, doff, adjust, and wear PPE, the limitations of the PPE, and the proper care, maintenance, useful life and disposal of the PPE. Each affected employee will demonstrate an understanding of the training and the ability to use PPE properly.

NOTE: OSHA’s PPE final rule becomes effective on February 13, 2008, published in the Federal Register November 15, 2007, page 64342. The final rule must be implemented by May 15, 2008.

*See our Consulting Services if you need assistance in preparing a Personal Protective Equipment evaluation/selection.

Length	4 hours
Cost with materials	$1065 up to 12 participants
References	29 CFR 1910.132 - 139

Powered Industrial Platforms

See "Aerial/Bucket Truck and Scissor Lift Training"

Process Safety Management (PSM) - Initial Training

The major objective of process safety management (PSM) is to prevent unwanted releases of hazardous chemicals, especially into locations that could expose employees and others to serious hazards. All current employees who are involved in operating a process must receive training, and each new employee must be trained before operating a newly-assigned process. The training will emphasize specific safety and health hazards, procedures, emergency operations that include shutdowns, safe practices applicable to the employee's job tasks, and significant changes in the process.

*See our Consulting Services if you need assistance in preparing an Process Safety Management Plan

Length	2 - 40 hours
Cost with materials	Varies - contact us for a quote
References	29 CFR 1910.119

Process Safety Management (PSM) - Refresher

Personnel involved in the PSM must have refresher training at least every three years, and more often if necessary, to assure that the employee understands and adheres to the current operating procedures of the process. This program covers all aspects of the written PSM plan.

Length	2 - 8 hours (contact for details)
Cost with materials	Varies - contact us for a quote
References	29 CFR 1910.119